Legend Fitness Total Hip Machine

150 lb. weight stack 55" L x 27" W x 70" H. 575 lbs.

$3,136

• Machined to a minimum tolerance of +/- .030". The all-welded construction is primarily 3" x 3", 4" x 2", or 3" x 2" with 11-gauge steel and a combination of other heavy structural tubular steel.
• Powder-coated baked on finish that is scuff resistant and long wearing.
• Padding is 2" thick virgin foam with a density of 12 lbs./cu. ft. Upholstery is 32 oz. Sulfide-stain resistant Naugahyde. All pads are top double-stitched.
• Input and movement arms rotate with either nonfriction roller bearings with Basic Radial Load Rating of 2,420 lbs., contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment.
• Weight Transport: ¼ " diameter aircraft cable with a 7 x 19 construction and black nylon coating. The cable is rated at a breaking strength of 4,200 lbs.
• 4½ " diameter fiberglass-impregnated nylon with a precision fit cable groove and double-sealed, nonfriction roller bearings.
• Solid steel weight stack plates with a black finish. Self-aligning low friction sleeve bearing surround the guide rods on every weight stack plate.
• Heavy-duty die cast springs are used under the weight stack to reduce shock and vibration stresses.
• Solid steel and hard chrome-plated to ensure quiet operation and low friction movement.
• Weight stack pins that are lanyards with a coiled self-storing cord to prevent pin removal or loss.
• All bolts meet ANSI B18.3 specifications.
• 45 durometer rubber handgrips are used for comfort, safety, and durability.
• Made in USA.

Did you like this page? Like us on Facebook, share our articles and keep in touch!